CR Machine's performance 2 stroke bicycle motors

bicycles reviews | bicycles videos | bicycles online

1. fred do you get rid of those crappy chinese bottom needle bearing bubby ?
2. How much and how do I go about buying one and how high can I rev it and how fast will it go I'm only 15 and I would like a somewhat good deal if there is any wiggle room
3. I want to learn more about them
4. I think closing the tolerance on these 2 stroke cranks, hits right at the core of improving them.  I would like to have a 48cc, or 66cc with this done to it, but I would want it to have no problem with pump gas.  Can you do it, and how much $ for it?
        If you're gonna sell the offset one, you will have to rig the rear motor mount for us.  Thank you.
5. I Like it/Them, But That is a little more than I can Throw! Nice though! I am porting My own! 
6. How much is only the head my bike is 80cc and whare i can finde thanks?
7. I run a "speed demon" exhaust it's the smaller expansion chambered exhaust system similar to the stock but with a an expansion chamber and silencer with a RungTung carb and short shot port and polished intake would the 6.0 cc cylinder head be a good choice and should I run a higher grade fuel if yes instead of 87 unleaded?
   
   
8. How much HP do these reworked engines put out? I want a fast bike that I can go on the streets with, so help me out here Fred. Im interested in buying one of you're engines listed on ebay. Which one do you recommend for speed and i really want that fat tire but i see I need some fabrication for it. Or should I buy that really expensive 10HP by Arrow Motorized Cycles?  
9. I'm selling complete motors in my ebay store called "Fred's Store". Try searching for high performance motorized bicycle motor, and I think you will find one of my listings. All my motors are complete reworks.
10. So how can i get one of these motors
11. Hi. Well, the low compression head allows you to run normal 91-93 octane pump fuel even if you have an engine that breaths well. If you are running stock exhaust, you probably don't need to use the low compression head.
12. What the advantage of a 7cc combustion chamber?
13. Fred I realy want a motor from you! I watched your videos and I love your work. I realy like like the fully modified with the 7cc combustion chamber but acces to fabrication hardware (welders, etc.) is limited. Is it possible to have a cross breed sort of version built? and if so, how much would you charge? (I want qaulity over cheap lol ) Thanks Fred.
14. Well, the price for one of my engines is more like $600.00. The stuff that is assembled in China have a lot of problems. My engines have special billet parts. They are special engines, assembled with care and attention to detail. I wish I could charge less, but I can't because of how much time it takes to do it right.
15. Well, yes, they are 2 stroke engines which require oil mixed with the fuel. What I mean by normal pump gas is that is relatively low octane fuel. The other type of fuel would be racing fuel, which has 100 plus octane. 
16. when you say pump gas you mean mixed because it is a two stroke right
17. Hi. I do ship to Hungary. Here is a link to one of my listings you might be interested in. I can't put any links in my response, but you can go to ebay and search for "high performance bicycle engine" You'll probably find my store. My store is called "Fred's store" Thank you. -Fred
18. Helló Fred! I am from hungary. Where to buy the engine and how much does it cost? please let me know. thank you
19. Can you stamp Fred on your heads
20. I put the engine on the right in my ebay store, "Fred's store". You can probably find it by searching for "motorized bicycle high performance motor"