How To Install 80cc 2-Stroke Bicycle Engine Kit FULL DVD 66cc 48cc 50cc
bicycles reviews | bicycles videos | bicycles online
Click Here to watch the NEW 2016 Installation Guide ► https://youtu.be/aTL5hmPx6a0?t=9s Download the 2-Stroke Engine Kit Installation Manual ► http://bit.ly/1N3y76a http://www.bikeberry.com/gas-engine-kits/gas-engine-kits.html - BikeBerry.com technicians, Jonny and Matt, go over tips and tricks on how to install an 80cc, 66cc, 49cc or 50cc 2-stroke engine kit on a standard beach cruiser. This complete installation manual gives great advice on installing the complete motorized gas bike kit as long as the bike is a 26" Men's beach cruiser. By providing this extensive tutorial guide, we are here to help turn your bicycle into a motorized bicycle. Table of Contents: 0:15 - Picking the right bike 0:58 - Parts List 2:02 - Sprocket Assembly 5:28 - Mounting the Engine 9:23 - Installing the Clutch 11:01 - Installing the Chain + Pulley 13:51 - Installing the Throttle Assembly 14:48 - Installing the Carburetor 16:25 - Installing the Electrical Components 17:36 - Installing the Muffler 17:43 - Installing the Gas Tank 19:01 - Installing the Chain Guard 20:10 - Maintenance and Fuel Mix Got any other advice? Any questions about the installation? Leave a comment! Follow us: Facebook: https://www.facebook.com/bikeberrycom - We share great tips, tricks, and advice as well as show off many of our fan's custom built gas bikes. Wanna share your build? Come join the community! If you you're still reading this, that means you must really like us! Subscribe for more videos. Thanks! Credits: "George Street Shuffle" Kevin MacLeod "Faster Does It" Kevin MacLeod "Mining by Moonlight" Kevin MacLeod "Hightlight Reel" Kevin MacLeod "Breakdown" Kevin MacLeod Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Comments
-
this video sucked
-
I was thinking of buying one of these how well do they work
-
forgot oil/gas ratio.
-
the wiring colors for the cdi are different
-
there are some things that may take a little more time to install such as the throttle cable to the carburetor due to the spring being so awkward to compress.
We purchased two motors and keep them aboard our yacht for times when suitable means of transportation are not available.
They run great. One needs a bit of TLC, but work out nice. -
I made the mistake of listening to people and watching videos about building a bike. They said never use rubber motor mounts. Big mistake as I had nothing but problems the whole time. Finally mounted it with them and it made all the difference in the world. Always always use rubber when mounting a 2 stroke.
-
where can I get this hole kit and how much
-
thank you you gave me information without borring me
-
Hey I've got a question can the engine run without the carburetor. Like if you shoot the fuel directly into the opening (carburetor opening), wouldn't that increase power to?
-
I accidentally took the piston out how do i put it back in
-
could this be applied to a stretch limo frame?
-
What's the size of the screw that locks the clutch cable in
-
Can you make a list of the tools needed?
-
what kit brand did you use for this video
-
You're awesome my friend! Great clip
-
When I put my sprocket on the spokes I did it by taking the rear wheel off the bike, fitting the sprocket, plates, bolts, rubber ect loosely then refitting the wheel to the bike to do the alignment.I find if you attach something to the bike's rear frame near the sprocket (ideally a DTI gauge but lol I held the hammer against the frame) and rest it on the big sprocket so its just touching, then turning the wheel it will let you see how much the sprocket is out by and let you adjust it in both up and down and left and right directions until you have it done up right. The manual with mine said the tolerance is 1.5mm (but not in which direction?) which was easy enough to achieve.
-
3:40
Can I push the bolts through the opposite direction?
Instead of the screws going in through the gear and popping out INSIDE the sproket, can they go OUT the gear and me bolt on that side? My fingers cant reach inside to bolt them in and it makes much more sense doing it the other way -
What are the most reputable/reliable engine kit companies out there?
-
how should this stop .. where is the breaks ?
-
when I start my bike it just gradually increases in speed. No many how any times I rev the throttle it will not increase speed. I can only do this by adjusting the gas intake while riding, which is incredibly dangerous. It does get up to 25 pretty quick when I increase the gas intake a bump right after takeoff, but anyway to fix the throttle to control speed?
20m 59sLenght
4207Rating