1209605View
3m 6sLenght
2117Rating

Heres some pictures and a short video of a homemade motorized chopper bicycle i built. (please comment) ANSWERS TO QUESTIONS I have been seeing. It began as a schwinn bicycle, the motor is a 66cc 2 cycle (2 stroke). It has a clutch with one speed and its push start. I have the gearing to make it go about 20 mph. I had to cut and weld my own motor mounts, gastank mounts and rear sproket. Footpeg bracket is custom made but the actual pegs can be bought online. To find the engine, google: 66cc bicycle engine. For being street legal, each state is different, some its legal and some its not. IF YOU ARE GOING TO MAKE ONE: It requires some mechanical background. Wireing the coil, kill switch ect is basicly trial and error. motor mounts are going to haveto be made and welded because the ones that come with the motor do not work. The engine exhaust and intake ports are going to haveto be finished wich requires the engine to be taken apart and the piston removed and put back. For some reason they leve sharp burrs on the ports which will wear out the rings very quick if its not sanded off. I hope all of this info helps and good luck.