Scooter Drive Belt Replacement

bicycles reviews | bicycles videos | bicycles online

1. the most important part you leave out
2. i have a 50cc and the bolt on the clutch will not break lose at all
3. It would help with a piston stopper get the rite one for make or model ok hope this helps you can purchase on ebay
4. It would help with a piston stopper get the rite one for make or model ok hope this helps you can purchase on ebay
5. Hi Moped MeDICKS - Does using an impact wrench mean that you don't have to use a variator blocker? I can't take my variator nut off because it's too tight and I can't source a variator blocker for my older scooter to stop the whole variator spinning when I try to take the nut off with my socket wrench.
6. whats the small gear above the larger gear called I think mine is out of line or something
7. What size belt is this
8. Wow your annoying
9. hey got a question do I have to line up the teeth or not on the part that you said be carefull to line up your teeth...the only way to line it up I have to pull the top small teeth off a bit and line it on the big one then  It would be loose from inside the small one..thanks
10. That's not your real voice..
11. that a 50cc bike actuly 49cc,
12. Argh... I need this drill for one nut!
13. Why would you skip showing us how to put the belt on? !! Why do you think People are watching?!
14. would keep watching videos on here. dont have to do any of this simple thing to do takes 5 mins.
15. I have never had to remove the nut on the pulley. I have been able to compress the clutch by hand, use the belt to hold it open, and slip it over the front pulley. It takes 5 minutes. 
16. i heated the belt a little to make it easier to slide on!!!
17. ha. I had a chuckle watching this. I'm sure Milwaukee loves you representing them.  HIP HIP!
18. Cool video. Now HOW do you get the rear drive belt pulley off when the blessed thing is JAMMED on? So frustrating.