Author: BattonFive
726View
9m 5sLenght
12Rating

Some additional notes for this design guys: I will add a camera on to the back of the frame underneath the batteries with a small screen on the front handlebars to act as a mirror to see following traffic stops having to shoulder glance all the time while in traffic. The wrack on the front and back of the bike i will aim to get to click on and off the bike, to provide for local riding and then a lighter off-roading layout. Wires running from and to the controller from the battery arrays on the back of the bike will likely be cable tied on to the outside of the bike frame, then likely taped over with black tape. I prefer a rear motor pushing the bike as 90% of the weight will sit on that hub motor like riding a monocycle, but a front hub motor could work here as well as it would distribute the weight nicely between the two wheels. I will source a wider more comfortable seat to sit on. I will aim to get a thick plastic casing to cover the rear batteries as it will be light weight and stop piercing of the cell packs. Here’s the link to the chassis of the fatboy 48v 10ah setup: http://www.ebay.co.uk/itm/500W-E-Bike-48v-10-4ah-Lithium-Battery-/152178302707?hash=item236e889ef3:g:xfcAAOSwWF5XLqxD Any questions, comments, or tweaks to the design please do leave them in the comments below  Thanks for checking in.