Wheel Spoke Tension Meter Park Tool TM-1 Home Bike Mechanic
bicycles reviews | bicycles videos | bicycles online
Recorded on July 24, 2010 using a Flip Video camera.
Comments
-
Nice video Bikeman!
-
Hah BikeManForU is a boss!
-
For the price, yeah you should handle this meter with care, not cheap. This is one of the less expensive models, about $98-100 other park meter models are $250 and up!
-
Also when you first mentioned this is a wheel building tool, you are checking the tension on the low grade wheel that is being checked with a tire inflated to correct psi. Is this tensioner reading correctWhen you first build it or one attire is audited and inflated to correct PS I?
-
And Also is there a publication of the spoke tension matching with at least the most common of rim design, be it with and or without eyelets. I was thinking of the ones with eyelets have a higher tension. Hmmm.
-
Is your tention checked before or after the tire is on the rim and inflated? I was just curious about load tension of the spoke at the 6 o'clock position with a load on it. What I'm asking is when is the correct, and most accurate Time to check spoke tension? Also when you do all we'll build you pre- stress the spokes in any way?
-
How friendly he is :), a very strong man and otherwise so "delicate" :), yes that is a important tool.
-
عاشت ايدك
-
عاشت ايدك
-
STFU
-
Goddamn that is one creepy dude.
-
watched for about 30 seconds and couldn't watch anymore. Crazy guy you'd expect to see on the news after shooting a school up.
-
Just got mine today in the mail. Where exactly is your pointer (on the number scale) when the grip is at rest?
-
Nice video, thank you
-
the tension tool can be used when truing wheel? On my bike the front wheel is off. is close to the left side of the fork. How i bring to the center. I lose the left side spokes and i tighten the right side spokes. But the wheel stay left what i do wrong. One i do wrong and i screw up strip four spoke nipples. The bike is new but the spokes is was lose. I tighten the spokes both sides after i tried truing the wheel. But i do the spokes too tight when i tried truing the wheel some spokes nipples is strip.
-
So: Is this tool worth 100usd? Cant you just check the spokes by hand or see if its true... Then again I'm havent built any wheels yet.
-
Might want to pay attention to where on the spoke you take the measurement. Tension might be different in the middle than near the end.
-
"Put it in a special spot" at 4:00 means hide this tool from the other clowns in my workshop that throw spanners around! LOL
-
PLEASE!!! Use a tripod!
-
vERY NICE VIDEO
4m 11sLenght
292Rating